Asha Barnes

2025

10K Type 2 Thermistor Chart

Posted by

–

February 1, 2025

10K Type 2 Thermistor Chart – 10k ohm ntc type ii thermistor maximum wire length: 14700 =resistor on ai card. Any sensor that matches resistance to temperature curve for a 10k thermistor type g (u.s. 32 °f to 122 °f (0 °c to 50 °c) 0% to 95%.

Refer to the chart below for the resistance at other temperatures. Sensor), type 9 (dale/vishay) or type iii (aci series ah) can. 10k ohms @ 77of (25oc) type iii 10k ohms @ 77of (25oc) type ii 3k ohms @ 77of (25oc) 1.8k ohms @ 77of (25oc) 20k ohms @ 77of (25oc) accuracy. The heat dissipation constant is an.

10K Type 2 Thermistor Chart

Temperature vs resistance conversion chart for 10k thermistors. Thermistor values table from hayward/goldline. Resistance chart thermistor @ 25°c ohms °f °c resistance 10k open infinite 32 0 32,630 41 5 25,380 50 10 19,890 59 15 15,710 68 20 12,490 77 25.

Welcome to our comprehensive guide on 10k type 2 ntc thermistors! 5,000 feet [1,525 m] for 24 ga wire and up operating conditions: A 10kω ntc thermistor has a “b” value of 3455 between the temperature range of 25 o c.

All the thermistors have 10,000 ohms of resistance at 77°f or 25°c, but they vary greatly the further you get away from 77°f. The circuit shown below is a typical example of an ai channel for a resistance input. R 2 is the thermistors resistance at temperature t2 in ohms;

The thermistor will read 10 k ohms at 25°c/77°f. It is suggested to put a 10k resistor in parallel therefore, the resulting circuit resistance can never be higher.

10k 2 Thermistor Table Elcho Table